Paul Cotto-Film Slicer

Forum covering all aspects of small gauge cinematography! This is the main discussion forum.

Moderator: Andreas Wideroe

Post Reply
User avatar
Nigel
Senior member
Posts: 2773
Joined: Sat Oct 05, 2002 10:14 am
Real name: Adam
Location: Lost

Paul Cotto-Film Slicer

Post by Nigel » Tue Aug 29, 2017 12:30 am

What happened with Paul and his film slicer?

Good Luck

User avatar
Nicholas Kovats
Posts: 767
Joined: Sat Mar 25, 2006 7:21 pm
Real name: Nicholas Kovats
Location: Toronto, Canada

Re: Paul Cotto-Film Slicer

Post by Nicholas Kovats » Tue Aug 29, 2017 1:39 am

I cannot find the original thread. What was that about?


Sent from my iPhone using Tapatalk
Nicholas Kovats
Shoot film! facebook.com/UltraPan8WidescreenFilm

User avatar
S8 Booster
Posts: 5852
Joined: Mon May 06, 2002 11:49 pm
Real name: Super Octa Booster
Location: Yeah, it IS the real thing not the Fooleywood Crapitfied Wannabe Copy..

Re: Paul Cotto-Film Slicer

Post by S8 Booster » Wed Aug 30, 2017 6:00 pm

Wasn't that a film perforating machine? He faded away from the forum quite soon after he retired from "The Force" if my Soft Disk serves me right.
The perf machine was never finished while he was on this forum as per my SDisk.

Perforator + slicer that may have been.

http://forum.filmshooting.com/scripts/f ... 42&start=0

http://filmshooting.com/scripts/forum/v ... f=1&t=2048
Last edited by S8 Booster on Wed Aug 30, 2017 6:13 pm, edited 1 time in total.
..tnx for reminding me Michael Lehnert.... or Santo or.... cinematography.com super8 - the forum of Rednex, Wannabees and Pretenders...

User avatar
Nicholas Kovats
Posts: 767
Joined: Sat Mar 25, 2006 7:21 pm
Real name: Nicholas Kovats
Location: Toronto, Canada

Re: Paul Cotto-Film Slicer

Post by Nicholas Kovats » Wed Aug 30, 2017 6:05 pm

I appreciate the update. Pro perf machines are substantial heavy beasts. I have a hazy recollection his prototype was light weight.


Sent from my iPhone using Tapatalk
Nicholas Kovats
Shoot film! facebook.com/UltraPan8WidescreenFilm

Arislan
Posts: 489
Joined: Wed Jan 04, 2006 4:22 am
Location: Enjoying Fujichrome

Re: Paul Cotto-Film Slicer

Post by Arislan » Fri Sep 01, 2017 2:38 am

Paul was great, he worked on a couple of my cameras.
"Here we all are, all our nationalities chatting and joking on a forum- two or three generations ago we were blowing each other up! "

Post Reply