Search found 665 matches

by mr_x
Sat Jan 24, 2015 5:45 pm
Forum: Small gauge film forum
Topic: E6 Times?
Replies: 3
Views: 712

Re: E6 Times?

Found the thread, was courtesy of Richard down under ;) if using tetenal chemistry, 1 litre can process 5 rolls. Each roll will have different first dev, second dev and blix times. The tetenal booklet that comes with the film will provide enough info to work out these times. They will be something l...
by mr_x
Sat Jan 24, 2015 5:33 pm
Forum: Small gauge film forum
Topic: DIY Flm Scanning
Replies: 54
Views: 11784

Re: DIY Flm Scanning

Sorry, was confused, thought we were discussing scanning?
by mr_x
Fri Jan 23, 2015 9:18 pm
Forum: Small gauge film forum
Topic: E6 Times?
Replies: 3
Views: 712

Re: E6 Times?

aj wrote:5 seconds time difference on an amount of 375 seconds??? Considering all factors I doubt this will make any noticeable difference.
Thanks, well I thought timings were pretty critical - especially for colour technology?
by mr_x
Fri Jan 23, 2015 8:02 pm
Forum: Small gauge film forum
Topic: E6 Times?
Replies: 3
Views: 712

E6 Times?

Hi, Have posted this in the past but can't find the thread :-o so am re-posting the question, just to be on the safe side. I have two 50' lots of 16mm Kodak Ektachrome 7285 (asa100) to develop. The last advice I had was First Developer time: 6',15" with second processing time at 6',20" and so forth....
by mr_x
Fri Jan 23, 2015 7:07 pm
Forum: Small gauge film forum
Topic: DIY Flm Scanning
Replies: 54
Views: 11784

Re: DIY Flm Scanning

carllooper wrote: lamp might need some dimming to avoid risk of heat damage to the film
if you are videoing onto the film gate you shouldn't need a very bright light source, that would also give your transfer 'hot spots'.
by mr_x
Tue Jan 20, 2015 2:58 am
Forum: Small gauge film forum
Topic: DIY Flm Scanning
Replies: 54
Views: 11784

Re: DIY Flm Scanning

Thanks!! The bellows front element controls the focus, and the sliding baseplate that the camera is mounted to effects the zoom. I used to have a two directional setup for a while that the whole rail system was attached to, which allowed control towards and away from the film plane (zoom) as well a...
by mr_x
Mon Jan 19, 2015 2:57 am
Forum: Small gauge film forum
Topic: DIY Flm Scanning
Replies: 54
Views: 11784

Re: DIY Flm Scanning

Looks nice :) like the bellows on the cam, does that function as a zoom here? The Eiki has a roomy lamphouse which must be a boon ;)
by mr_x
Wed Jan 14, 2015 7:27 pm
Forum: Small gauge film forum
Topic: DIY Flm Scanning
Replies: 54
Views: 11784

Re: DIY Flm Scanning

Frame-by-frame capture? Folks do that, the Edwardian Turner film experiment was finally realised by way of single frame imagery set in motion on a computer. It's a great shame they didn't attempt the experiment in real time however, we may never know if Turner's experiment had a hope of working on t...
by mr_x
Mon Jan 12, 2015 6:53 pm
Forum: Small gauge film forum
Topic: Foma 100 filming in 90 degrees of heat?
Replies: 18
Views: 4373

Re: Foma 100 filming in 90 degrees of heat?

Here at length is the footage. If anything it's slightly under exposed. I wonder why this is? Is it that the colossal zoom lens on the K-3 eats up light up compared with my hand-held light meter which just meters raw, ambient luminance?

http://youtu.be/0SPJ-6getwY
by mr_x
Mon Jan 12, 2015 6:25 pm
Forum: Small gauge film forum
Topic: DIY Flm Scanning
Replies: 54
Views: 11784

Re: DIY Flm Scanning

A Kodak carousel lens gets me even closer - reduces the aerial space between me and the raw film - with the addition of a couple of macro filters on the Kodak at the film gate end. The challenge with a TQIII is that the lamp house is set so far back into the projector, no reverse lens arrangement I ...
by mr_x
Sat Jan 03, 2015 4:31 pm
Forum: Small gauge film forum
Topic: DIY Flm Scanning
Replies: 54
Views: 11784

Pet Sounds Re: DIY Flm Scanning

This is what I do - it's still evolving - capture direct to hard drive then edit in software of choice - http://i124.photobucket.com/albums/p32/r_i_c_2007/panny-eumig-setup_zps29ac6162.jpg I use a reversed lens on the video camera to transfer 8mm. For 16mm, the film gate is too far away for this ar...
by mr_x
Mon Dec 29, 2014 3:30 am
Forum: Small gauge film forum
Topic: Krasnagorsk k-3 dust?
Replies: 2
Views: 593

Re: Krasnagorsk k-3 dust?

Thanks Richard! ;)
by mr_x
Mon Dec 29, 2014 3:29 am
Forum: Small gauge film forum
Topic: Tetenal film cleaner?
Replies: 2
Views: 701

Re: Tetenal film cleaner?

Good idea, thanks. I found some FC50 stashed away so i'm not desperate yet :)
by mr_x
Mon Dec 29, 2014 1:19 am
Forum: Small gauge film forum
Topic: DIY Flm Scanning
Replies: 54
Views: 11784

Re: DIY Flm Scanning

This is what I do - it's still evolving - capture direct to hard drive then edit in software of choice -

Image

;)
by mr_x
Mon Dec 29, 2014 12:35 am
Forum: Small gauge film forum
Topic: Krasnagorsk k-3 dust?
Replies: 2
Views: 593

Krasnagorsk k-3 dust?

Hi,

What's the best way to get at & get rid of this debris round the gate please?

Image

Thanks ;)