https://youtu.be/vNr6K0xD93M
Un 54 was shot today in a H8 Rex, hand held. The film was developed to negative. After it dried, I printed it on ORWO DP 3. The lamp was on 3 or the dial was close to 7, like 6 3/4 to make 3 exact on the needle. I spliced it together without using a viewer, so it is all messed up. But all I really wanted to see was if the projected positive print looked good. It does. Even though the print looks dark.
Short 3 foot strips were printed hand held. JOBO 110 reel was used in a tiny tank to develop the tests. One Shot (Rodinal) 1:50, 10 min, 68 degrees, stop bath 30 sec., fix 10 min, wash by the Ilford method and a short photo flow. Films were wiped. dropped. lost, torn up, scattered, reversed. lost
My first Regular 8mm Print from negative
Moderator: Andreas Wideroe
-
- Posts: 170
- Joined: Sat Sep 07, 2013 4:09 pm
- Real name: Michael A Carter
- Contact: