Hello.
I have searched the forums for info, and came across some posts by Jcook about removing the covers from a canon 1014 electronic, but no mention of the handle. Has anyone had experience in removing this? I have an old 814 that i am going to use as practice first, i just hoped someone might know the secret access to remove the *&%$ thing?!
cheers
removing battery handle, 1014 electronic
Moderator: Andreas Wideroe
- Mr Blackstock
- Posts: 100
- Joined: Sat Mar 12, 2005 4:43 am
- Real name: Gareth Blackstock
- Location: melbourne, australia
- Contact:
removing battery handle, 1014 electronic
Melbourne Super8/16mm
www.mishkin.yolasite.com
www.canon-s8-repair.yolasite.com
www.mishkin.yolasite.com
www.canon-s8-repair.yolasite.com
Re: removing battery handle, 1014 electronic
If you can get as far as to remove both left and right covers, then it shouldn't be hard to figure out how to remove the handle as it is under the right cover.
Cheers,
Jean-Louis
Cheers,
Jean-Louis
Jean-Louis Seguin
Motion Picture Camera Technician
Montreal, Canada
Motion Picture Camera Technician
Montreal, Canada
-
- Senior member
- Posts: 3556
- Joined: Thu Oct 02, 2003 1:15 pm
- Real name: Andre
- Location: Netherlands
- Contact:
Re: removing battery handle, 1014 electronic
I supposed you had seen the pictures on this page:
http://www.nakanocam.com/8mm_page/canon1014xl-sfps.html
Try some translator site for the text
http://www.nakanocam.com/8mm_page/canon1014xl-sfps.html
Try some translator site for the text

Kind regards,
André
André
Re: removing battery handle, 1014 electronic
Under the cover where the handle is attached to the camera body there is a coin sized metal disc. There are two very small screws on the top side of the disc. Loosen those screws and unscrew the disc by rotating it counter clockwise.