I just purchased a Canon 814XL-S off ebay. I studied the manual, and worked with the camera to get to know it. I have a concern regarding the shutter angle. This camera comes with a 150 degree setting as well as an "XL" setting of 220 degree setting. When I switch between the 2 shutter settings, I can hear what I something happening for about 2-3 seconds, like the camera making the adjustment. The concern I have is that the aperture indication reading in the viewfinder does not budge at all. I have tried making the adjustment under various conditions (e.g., w/ and w/out film, low light environment and high light environment, 9 18 and 24 fps) and the aperture reading doe not budge when I change the shutter setting. That said, when I engage/disengage the internal filter, change fps, and zoom in and out, the aperture reading does change.
Does anything have any experience with this for the 814XL-S or the 1014XL-S? I am trying to decide if I should return the camera.
Forum covering all aspects of small gauge cinematography! This is the main discussion forum.
Moderator: Andreas Wideroe
1 post • Page 1 of 1