Hi everyone! I've been away from the boards from a while, very busy moving into a new place and wrapping up my film project. Anyway, I just bought a Nizo 6080 but I'm getting frustrated really fast.
I might just be missing something incredibly simple.
I put batteries in it (1.5V AAs) and I get NO response. No lights, nothing. I've got the master switch depressed and I've tried all sorts of settings on the camera. I've looked through the manual to no avail. I don't know if my battery box is messed up or if I'm inserting the batteries wrong or something. Is it a weird battery setup? If not, I would have to think that the darn thing is broken (grr). Do you have any hints for me?
Thanks.
Marc S.
Please help me with my Nizo 6080!
Moderator: Andreas Wideroe
-
- Posts: 374
- Joined: Wed May 01, 2002 4:55 pm
- Location: NYC - Queens
- Contact:
batt. diagram
Just to be sure...
I am looking at my accumulator box. The type is upright and the contacts are on the bottom. When I pull off the top, what should I see? With batteries loaded, I see the following from the top:
-+
+-
-+
Is that correct? To be truthful, I tried it the opposite way as well and neither worked.

I didn't buy the cam from Alex/Dr. Peters/whoever. But the guy DID say it worked. I'll have to contact him.
Thanks.
Marc S.
I am looking at my accumulator box. The type is upright and the contacts are on the bottom. When I pull off the top, what should I see? With batteries loaded, I see the following from the top:
-+
+-
-+
Is that correct? To be truthful, I tried it the opposite way as well and neither worked.

I didn't buy the cam from Alex/Dr. Peters/whoever. But the guy DID say it worked. I'll have to contact him.
Thanks.
Marc S.
-
- Posts: 374
- Joined: Wed May 01, 2002 4:55 pm
- Location: NYC - Queens
- Contact:
Re: Nizo 6080
I had the same problem with my Nizo 6080 a while ago.
Nizos can only be used with 1,2 V cells. The voltage gets too high when using these 1,5 V AA batteries. So try some rechargable cells instead.
Best wishes, Nico
Nizos can only be used with 1,2 V cells. The voltage gets too high when using these 1,5 V AA batteries. So try some rechargable cells instead.
Best wishes, Nico