Silma Dual 8 SOUND projector from 1965?!!!

Forum covering all aspects of small gauge cinematography! This is the main discussion forum.

Moderator: Andreas Wideroe

Post Reply
User avatar
MovieStuff
Posts: 6135
Joined: Wed May 01, 2002 1:07 am
Real name: Roger Evans
Location: Kerrville, Texas
Contact:

Silma Dual 8 SOUND projector from 1965?!!!

Post by MovieStuff »

No response from the "other" board. So here it is:

It was described as a "Silma super 8 and standard 8mm SOUND projector" from 1965! I have never heard of one of these but, it looked so pretty, I had to bid on it and I won it for $31.00. Was this a good deal? Anyone know anything about them? Looks like it's made out of all metal but who knows? Apparently it's an Italian model but will run on 115VAC. Anyway, I'll get it in a week or so out of Mexico. Any information from the peanut gallery would be welcome. Here's a pic.

Image

Thanks!
tfunch24 being lazy

Post by tfunch24 being lazy »

I never heard of the projector before so I cannot help you there.

However, I read on this board a few months ago that there were Regular 8mm sound projectors available on the market in the late 1950s/early 1960s. According to the Regular 8mm enthusiasts, Keystone (or was it Fairchild?) offered a Regular 8mm camera that could record sound (though the original poster pointed out that it "couldn't do synch-sound.")

That written, a Dual 8mm sound projector from 1965 really isn't amazing. No offense and I don't mean to rain on your parade. Please do let us know how the projector operates.

Tom
User avatar
S8 Booster
Posts: 5857
Joined: Mon May 06, 2002 11:49 pm
Real name: Super Octa Booster
Location: Yeah, it IS the real thing not the Fooleywood Crapitfied Wannabe Copy..
Contact:

Post by S8 Booster »

Not much help here either but the Widescreen Centre sold some brand new Silmas a while ago: http://www.fvi.org.uk/newsuper8.htm Guess these models were from a more "recent" date and not running dual format 8.

Bauer apparently made quite a few dual format sound projectors: http://www.wittner-kinotechnik.de/aktue ... type=Bauer

You seem to have made a very good deal if you compare to the ones offered at Wittner.

R
..tnx for reminding me Michael Lehnert.... or Santo or.... cinematography.com super8 - the forum of Rednex, Wannabees and Pretenders...
jukkasil
Posts: 556
Joined: Fri May 03, 2002 9:06 am
Location: Sauvo, Finland
Contact:

Post by jukkasil »

Hi Roger!

According to Jurgen Lossau's great movie camera book, Bauer made couple camera and projector models to Silma.

So, maybe your projector is also maden by Bauer, who knows ...
Best Regards

Jukka Sillanpaa
Maurizio Di Cintio
Posts: 186
Joined: Sun May 05, 2002 4:56 pm
Location: Pescara, Italy
Contact:

Hi, Roger

Post by Maurizio Di Cintio »

Silma was the most important Italian manufacturer of S/8 projectors. During the last years of the S/8 age (early '
80's) it became part of the Bosch/Bauer German empire. As such its projectors, though belonging to a lower level of the market, used to share several parts with the higher end Bauer's.

But the projector you came across with, should be a "real" older genuine Silma. All in all these are very good consumer machine with a very good price/performance ratio.

By the way Silma went on manufacturing sound one track projectors as early as the early 90's with the Eumig brand name.

They were all manufactured in Turin northern Italy and were as popular as Eumig's were in other parts of Europe.

I hope this is of some interest to you.

Take care
attenka
Posts: 67
Joined: Wed Nov 20, 2002 11:16 pm
Location: Turku, Finland
Contact:

Re: Silma Dual 8 SOUND projector from 1965?!!!

Post by attenka »

MovieStuff wrote:No response from the "other" board. So here it is:

It was described as a "Silma super 8 and standard 8mm SOUND projector" from 1965! I have never heard of one of these but, it looked so pretty, I had to bid on it and I won it for $31.00. Was this a good deal? Anyone know anything about them?

Looks like it's made out of all metal but who knows?
I found one article from Finnish journal Tekniikan Maailma, ("World of Technics", Dec 1964) which dealed with Silma Compact 8. That projector was made of metal. There were one evident remark I noticed: "wire insulations were too thin (those which go to motor)". And light attachment was without enough touch shelter.

This is not the same machine, but be careful... :-)
Post Reply