WITTNER PXR 50 negative possible?
Moderator: Andreas Wideroe
-
- Posts: 76
- Joined: Wed Jan 22, 2014 11:02 am
- Real name: Fredrik Blomberg
- Contact:
WITTNER PXR 50 negative possible?
Halo
Do anyone have information on WITTNER PXR 50? Is it possible to negative delvelope?
Greeting
Fredrik
Do anyone have information on WITTNER PXR 50? Is it possible to negative delvelope?
Greeting
Fredrik
-
- Posts: 76
- Joined: Wed Jan 22, 2014 11:02 am
- Real name: Fredrik Blomberg
- Contact:
Re: WITTNER PXR 50 negative possible?
I develope by myself in a Loomo tank
Re: WITTNER PXR 50 negative possible?
freddenacka wrote:Halo
Do anyone have information on WITTNER PXR 50? Is it possible to negative delvelope?
Greeting
Fredrik
if it's B/W then you should be able to ! do not give it a bleach or 2nd dev , so just dev as you would for a neg ? I have never used this film I think you find it a agfa film, you can also email wittner if you have many ?????
-
- Posts: 76
- Joined: Wed Jan 22, 2014 11:02 am
- Real name: Fredrik Blomberg
- Contact:
Re: WITTNER PXR 50 negative possible?
Thanks! I did send them an email.
-
- Senior member
- Posts: 3556
- Joined: Thu Oct 02, 2003 1:15 pm
- Real name: Andre
- Location: Netherlands
- Contact:
Re: WITTNER PXR 50 negative possible?
PXR-50 Is Kodak Plus-X. It is clearly in the description.
Wittner perforate their own.
Wittner perforate their own.
Kind regards,
André
André
-
- Posts: 76
- Joined: Wed Jan 22, 2014 11:02 am
- Real name: Fredrik Blomberg
- Contact:
Re: WITTNER PXR 50 negative possible?
Would this be right?
http://motion.kodak.com/motion/uploaded ... TI0243.pdf
Would D19 8min 20c best in this case?
I use xtol for my other films
http://motion.kodak.com/motion/uploaded ... TI0243.pdf
Would D19 8min 20c best in this case?
I use xtol for my other films
Re: WITTNER PXR 50 negative possible?
Yes it will work and I have used this film plus X , Just dev for a neg very easy ,freddenacka wrote:Would this be right?
http://motion.kodak.com/motion/uploaded ... TI0243.pdf
Would D19 8min 20c best in this case?
I use xtol for my other films
-
- Posts: 76
- Joined: Wed Jan 22, 2014 11:02 am
- Real name: Fredrik Blomberg
- Contact:
Re: WITTNER PXR 50 negative possible?
WITTNER have confirmed that it will work as negative and a lot of people use it that way. But they don't have any times for recommendation as negative.
Is D19 a good developer?
What's the big differences vs xtol?
I suppose D19 gives more contrasts?
I would like to get the benefits of a slower film grain and dynamic range.
Is D19 a good developer?
What's the big differences vs xtol?
I suppose D19 gives more contrasts?
I would like to get the benefits of a slower film grain and dynamic range.
-
- Senior member
- Posts: 3556
- Joined: Thu Oct 02, 2003 1:15 pm
- Real name: Andre
- Location: Netherlands
- Contact:
Re: WITTNER PXR 50 negative possible?
Read on here:
http://www.super8.nl/english/e_frames/e ... h_chem.htm
Check also EDUCATE and FILM research
D19 is best for reversal.
D76 is used for negative. Negative doesn't do well for sparkling contrast. Also negative is far more difficult to get evenly processed film from.
http://www.super8.nl/english/e_frames/e ... h_chem.htm
Check also EDUCATE and FILM research
D19 is best for reversal.
D76 is used for negative. Negative doesn't do well for sparkling contrast. Also negative is far more difficult to get evenly processed film from.
Kind regards,
André
André
Re: WITTNER PXR 50 negative possible?
Well it's a good thing you come on to a forum to ask many ? The thing with diy filming there are no set rule's just points from where you start ! and the line you finish !freddenacka wrote:WITTNER have confirmed that it will work as negative and a lot of people use it that way. But they don't have any times for recommendation as negative.
Is D19 a good developer?
What's the big differences vs xtol?
I suppose D19 gives more contrasts?
I would like to get the benefits of a slower film grain and dynamic range.
And homecooking takes time in learning what you are doing ! the dev time's which Aj told you about are agood starting point ,
Do reseach and find out what right for you ! and be ready fo disppointments that all part of the learning ?