Another Beaulieu battery question

Forum covering all aspects of small gauge cinematography! This is the main discussion forum.

Moderator: Andreas Wideroe

Post Reply
shoot1st
Posts: 5
Joined: Wed May 28, 2003 5:29 pm
Location: UK
Contact:

Another Beaulieu battery question

Post by shoot1st »

Advice needed! Can I use 1.2v rechargable NiCad cells in my Beaulieu 6008 battery pack? Will it give a better (longer) performance than 1.5v disposable cells? If the answer is yes, can I charge through the camera (as with the 8.4v 7-cell sealed NiCad pack)?
Yemi
Posts: 279
Joined: Sat Apr 19, 2003 12:08 am
Contact:

Post by Yemi »

Yes, According to the manual, NiCad cells will power more carts than Alkaline (non-rechargeable) cells. They can be charged 'in-camera' just like any other rechargeable power source that sits in the handle of the camera.

However, I think an 8.4v pack (internal or external) is the best solution. 6 AA cells are insufficient for reliable timelapse work, sound carts or powering any built-in crystal sync module.

------
Yemi
paulcotto
Senior member
Posts: 1087
Joined: Wed Apr 09, 2003 2:56 am
Location: Texas, USA
Contact:

Re: Another Beaulieu battery question

Post by paulcotto »

why not use Nimh cells? They have a much higher power density than NiCads so they last longer.


Paul Cotto
shoot1st wrote:Advice needed! Can I use 1.2v rechargable NiCad cells in my Beaulieu 6008 battery pack? Will it give a better (longer) performance than 1.5v disposable cells? If the answer is yes, can I charge through the camera (as with the 8.4v 7-cell sealed NiCad pack)?
Don't worry about equipment so much and make your movie!
Post Reply