Various gear needs a good home

Forum covering all aspects of small gauge cinematography! This is the main discussion forum.

Moderator: Andreas Wideroe

Post Reply
tacotim
Posts: 73
Joined: Thu May 15, 2003 7:24 pm
Location: SLC, Utah
Contact:

Various gear needs a good home

Post by tacotim »

Hi folks,

Doing some purging of my closet. Various stuff that I had good intentions for are just gathering dust. I'll be donating them to the local thrift shop in 2 days, but thought I'd offer them up here if anyone wants them. You pay for a box and the shipping and it's yours. PM me if interested.


Elmo ST-1200HD - Runs, but I tried to lube it myself about a year ago and must have lubed something that shouldn't have been, cuz it seems like a belt is slipping somewhere and as aresult the projector runs film through at a slower rate.


SUPER8 ANALYZER, This is a neat projector that has a little remote that allows you to advance one frame at a time as well as projecting at various frame rates up to 24 fps. Neat machine that has the potential for a diy transfer type machine. works fine as far as i can tell.


JUWEL MINI SOUND STRIPER. Some one gave me this thing, I have never used, nor do I know how to. Looks to be in very good shape. Has instruction booklet.


Bell and Howell 1625 projector. Have not used it. was given to me


Argus 2808 Editor/viewer. bulb is burned out.


LARGE HOLLYWOOD REWINDS, with various adapters and such.


BOLEX 18-5 Projecor. with case, powers up, lights up, but I think a belt is broken.

1 box of 5 very dusty 16mm projection lenses, 3 inch, 2 inch, 2 inch, 38mm and 1 anamorphic. the rear element on the anamorphic has a few nicks.


obviously everything is AS IS, not really selling, just giving away for the cost of shipping.


thanks, tim
caseycobler14
Posts: 13
Joined: Sun Oct 29, 2006 9:02 pm
Contact:

Post by caseycobler14 »

I'd be interested in the SUPER8ANALYZER. PM me or email me at casey@caseycobler.com

Thank, Casey
jaxshooter
Posts: 739
Joined: Mon Jun 28, 2004 10:52 pm
Real name: Marty Hamrick
Location: Windsor, Ontario
Contact:

Post by jaxshooter »

I would be interested in the Elmo,please email me at martyh1960@yahoo.com and let me know what it costs to ship it to Florida.
Marty Hamrick

Cinematographer

Windsor, Ontario
Post Reply