Just bought my first case of film
Moderator: Andreas Wideroe
Just bought my first case of film
I just ordered my first case of Film from Kodak. 20 reels in all. It cost about $160 plus shipping. I ordered TriX because I have a project I'm planning on shooting about 5 reels for in two weeks.
Should I put this Fiim right into the deep freeze when I get it? Or does it matter? I'm probably going to shoot all 20 reels within the next 4 months.
Also, wish me luck, I'm going to be finding out which one of my camera's takes the best shots as none of them have had any film in them for 25+ years, I'll post my results on here.
Should I put this Fiim right into the deep freeze when I get it? Or does it matter? I'm probably going to shoot all 20 reels within the next 4 months.
Also, wish me luck, I'm going to be finding out which one of my camera's takes the best shots as none of them have had any film in them for 25+ years, I'll post my results on here.
-
- Posts: 927
- Joined: Mon Feb 02, 2004 2:54 pm
- Location: Rochester, NY 14650-1922 USA
- Contact:
Re: Just bought my first case of film
No need to freeze the film. Kodak normally stores raw stock at about 55F. Best to refrigerate, but even cool room temperature is fine for B&W films stored a few months before use:johnnhud wrote:I just ordered my first case of Film from Kodak. 20 reels in all. It cost about $160 plus shipping. I ordered TriX because I have a project I'm planning on shooting about 5 reels for in two weeks.
Should I put this Fiim right into the deep freeze when I get it? Or does it matter? I'm probably going to shoot all 20 reels within the next 4 months.
Also, wish me luck, I'm going to be finding out which one of my camera's takes the best shots as none of them have had any film in them for 25+ years, I'll post my results on here.
http://www.kodak.com/US/en/motion/suppo ... 5.12&lc=en
John Pytlak
EI Customer Technical Services
Research Lab, Building 69
Eastman Kodak Company
Rochester, NY 14650-1922 USA
EI Customer Technical Services
Research Lab, Building 69
Eastman Kodak Company
Rochester, NY 14650-1922 USA
- steve hyde
- Senior member
- Posts: 2259
- Joined: Fri Jun 25, 2004 1:57 am
- Real name: Steve Hyde
- Location: Seattle
- Contact:
...yeah, I don't know why people "freeze" their film. This makes no sense to me. Film does not like temperature fluctuations that is why it is a best practice to *store* it in a refridgerator at 55f where the tempearture will remain constant.
Another practice that I find strange is when people put the film back into the refridgerator after they shoot it. This can result in condensation on the film since it is no longer in the foil.
If I understand correctly, (this is what the guys at my local pro camera shop told me) color films are more sensitive to temperature changes. Black and white film should be fine out of the fridge unless you don't plan to shoot it for a couple years.
Steve
Another practice that I find strange is when people put the film back into the refridgerator after they shoot it. This can result in condensation on the film since it is no longer in the foil.
If I understand correctly, (this is what the guys at my local pro camera shop told me) color films are more sensitive to temperature changes. Black and white film should be fine out of the fridge unless you don't plan to shoot it for a couple years.
Steve
-
- Posts: 215
- Joined: Fri Sep 12, 2003 12:44 am
- Location: New Port Richey, FL
- Contact:
"...yeah, I don't know why people "freeze" their film. This makes no sense to me. Film does not like temperature fluctuations that is why it is a best practice to *store* it in a refridgerator at 55f where the tempearture will remain constant. "
Help me out, Steve. Why would the fridge have a more stable temp than a freezer? Considering that the fridge door is often opened more often than the freezer door.
Or are you implying the greater degree of change between storage and room temp (coming from the freezer) is harder on the film than from the fridge?
Thanks for you thoughts
Joe
Help me out, Steve. Why would the fridge have a more stable temp than a freezer? Considering that the fridge door is often opened more often than the freezer door.
Or are you implying the greater degree of change between storage and room temp (coming from the freezer) is harder on the film than from the fridge?
Thanks for you thoughts
Joe
Zevon forever!
Heh, I've just moved quite a bit of my film 'hoard' to my freezer in the last couple of days. So I'm keen to see where this discussion goes.
Most of it is fresh 16mm colour negative- although there is some Super8 reversal in there as well (K40, E64T, Plus-X)- and has been in my fridge for 3-6 months. My reason for moving it is that I don't intend to use it for another 3 months or so. Would I have been better off leaving it in the fridge?
Cheers,
Bon
Most of it is fresh 16mm colour negative- although there is some Super8 reversal in there as well (K40, E64T, Plus-X)- and has been in my fridge for 3-6 months. My reason for moving it is that I don't intend to use it for another 3 months or so. Would I have been better off leaving it in the fridge?
Cheers,
Bon
-
- Posts: 927
- Joined: Mon Feb 02, 2004 2:54 pm
- Location: Rochester, NY 14650-1922 USA
- Contact:
Film Storage
No need to freeze raw stock if you plan to use it within a year or two. Refrigeration at about 10 Celsius is fine.Shion wrote:Heh, I've just moved quite a bit of my film 'hoard' to my freezer in the last couple of days. So I'm keen to see where this discussion goes.
Most of it is fresh 16mm colour negative- although there is some Super8 reversal in there as well (K40, E64T, Plus-X)- and has been in my fridge for 3-6 months. My reason for moving it is that I don't intend to use it for another 3 months or so. Would I have been better off leaving it in the fridge?
Cheers,
Bon
If you have opened the sealed packaging, freezing carries a risk of having excess moisture in the container form ice crystals.
Always let film warm up before using, to avoid any chance of condensation.
John Pytlak
EI Customer Technical Services
Research Lab, Building 69
Eastman Kodak Company
Rochester, NY 14650-1922 USA
EI Customer Technical Services
Research Lab, Building 69
Eastman Kodak Company
Rochester, NY 14650-1922 USA
- steve hyde
- Senior member
- Posts: 2259
- Joined: Fri Jun 25, 2004 1:57 am
- Real name: Steve Hyde
- Location: Seattle
- Contact:
...Kodak recommends storing films at 55 degrees F.Joe Gioielli wrote:"...yeah, I don't know why people "freeze" their film. This makes no sense to me. Film does not like temperature fluctuations that is why it is a best practice to *store* it in a refridgerator at 55f where the tempearture will remain constant. "
Help me out, Steve. Why would the fridge have a more stable temp than a freezer? Considering that the fridge door is often opened more often than the freezer door.
Or are you implying the greater degree of change between storage and room temp (coming from the freezer) is harder on the film than from the fridge?
Thanks for you thoughts
Joe
-
- Posts: 927
- Joined: Mon Feb 02, 2004 2:54 pm
- Location: Rochester, NY 14650-1922 USA
- Contact:
Colder is fine, but freezing is not necessary unless you want to keep film for many years. Although it greatly slows chemical changes in the film, freezing doesn't stop the fogging from ambient radiaion, and carries a risk of ice crystal damage. Most home refrigerators easily hold food and film at about 40F.steve hyde wrote: ...Kodak recommends storing films at 55 degrees F.
John Pytlak
EI Customer Technical Services
Research Lab, Building 69
Eastman Kodak Company
Rochester, NY 14650-1922 USA
EI Customer Technical Services
Research Lab, Building 69
Eastman Kodak Company
Rochester, NY 14650-1922 USA
-
- Posts: 927
- Joined: Mon Feb 02, 2004 2:54 pm
- Location: Rochester, NY 14650-1922 USA
- Contact:
Humidity
If the film is in its original sealed foil packaging, the relative humidity is not critical. Of course any cardboard or paper outer packaging can get moldy if you have very damp conditions.
John Pytlak
EI Customer Technical Services
Research Lab, Building 69
Eastman Kodak Company
Rochester, NY 14650-1922 USA
EI Customer Technical Services
Research Lab, Building 69
Eastman Kodak Company
Rochester, NY 14650-1922 USA