E64T Processing

Forum covering all aspects of small gauge cinematography! This is the main discussion forum.

Moderator: Andreas Wideroe

BonnutFilmStudio
Posts: 274
Joined: Sun Sep 12, 2004 6:04 pm
Location: Greenwich, CT
Contact:

E64T Processing

Post by BonnutFilmStudio »

Hi,
This question has been asked before and normally I'd look back at old posts, but the one result is not good enough for me. The Widescreen Centre and Andec are too much of a hassle to process through. Does anyone know if Dwayne's processes 64T? Or at least someone in the U.S.?
studiocarter
Senior member
Posts: 1573
Joined: Wed May 01, 2002 1:13 pm
Location: Pittsburgh, PA USA
Contact:

Post by studiocarter »

Why don't you go to their web site and find out?
Pittsburgh PA USA
regular8mm
16mmfilmmaking
User avatar
reflex
Senior member
Posts: 2131
Joined: Wed Aug 18, 2004 7:25 am
Real name: James Grahame
Location: It's complicated
Contact:

Post by reflex »

Dwayne's processes E-64T for $9/roll.

Their order form [pdf link]: http://www.dwaynesphoto.com/movies/k14m ... r_Form.pdf

You can also drop your film off at Wal-Mart or several other dubiously-named chains (Ralph's in Southern California apparently charges a mere $3.99) and they'll forward it to Dwayne's.
www.retrothing.com
Vintage Gadgets & Technology
John_Pytlak
Posts: 927
Joined: Mon Feb 02, 2004 2:54 pm
Location: Rochester, NY 14650-1922 USA
Contact:

Post by John_Pytlak »

Also, I just received this press release from Pro-8mm:
Los Angeles,  CA – January 2006 
Media Contact:  Rhonda Vigeant,  Rhonda@pro8mm.com

On  January 15, 2006, Pro8mm will begin offering a new E-6 motion picture processing service.  E-6 processing combines the quality of Kodachrome with the flexibility of VNF Ektachrome in one process, ensuring the future of reversal filmmaking.  The installation of E-6 processing furthers the company’s high level of commitment to support the diverse group of small gauge film users.

“The flexibility of E-6 processing will streamline the workflow of any Super 8 or 16mm project with same day services and rush processes.  This will simplify filmmaking for
everybody, from independent filmmakers, home movie makers and professionals”, says Pro8mm’s CEO Philip Vigeant.

E-6 processing  has already become a standard for reversal film applications in other industries. The process can be run push or pull.   E-6 will allow Pro8mm to carry on  into the future the highest quality, most reliable, fastest turn around,  small format motion picture film processing.

All of Pro8mm’s processing is done in-house and on site.  Film dropped off by 10:30 AM is ready for pickup by 5:00 PM the same day.  The addition of on-site E-6 processing is a huge improvement in workflow and moves a critical process back to the heart of the industry.  This is particularly crucial for industry users who rely on fast, dependable turn around.  Since Pro8mm offers same day processing for black and white, color negative,  and reversal film, the ability  for a client to integrate a multitude of  stocks which can  all be coordinated concurrently at one single facility  is a huge leap forward. 

Pro8mm’s brand of E-6 film is now available in 50D (Pro8/40) , 100D (Pro8/85), and 64T (Pro8/80).  Film is sold with processing for $35.  Processing for E-6 16 and Super 16 is also available.

For more information log on to http://www.pro8mm.com or call 818-848-5522
The press release has a photo showing a crew unloading their new E-6 processing machine from the back of a truck.
John Pytlak
EI Customer Technical Services
Research Lab, Building 69
Eastman Kodak Company
Rochester, NY 14650-1922 USA
User avatar
reflex
Senior member
Posts: 2131
Joined: Wed Aug 18, 2004 7:25 am
Real name: James Grahame
Location: It's complicated
Contact:

Post by reflex »

John_Pytlak wrote:Also, I just received this press release from Pro-8mm
Good that they offer processing, but $35 is extremely expensive for a roll of E-64T plus processing.

For comparison:

Dwaynes charges $14 for the film and $9 for processing. Total: $23.

You can cut another $4 or so off the price (and save postage) by dropping it off at Wal-Mart. The difference is over $16 -- enough to buy another roll of film.
www.retrothing.com
Vintage Gadgets & Technology
Evan Kubota
Senior member
Posts: 2565
Joined: Sun Apr 03, 2005 9:04 am
Location: FL
Contact:

Post by Evan Kubota »

Yeah, that is astonishingly expensive. The E6 process is clearly simpler than K14, so processing should be cheaper, not more expensive - other than Dwayne's through Wal-Mart, it seems like all other E6 S8 processing is significantly more than K40 was.

Has anyone actually received processed E64 from Dwayne's through Wal-Mart yet?

I forgot to order some E64 when I last ordered film from Kodak - I saw some at B&H in New York but it was $17/each! From Kodak with the student discount it's probably slightly under $10.
User avatar
etimh
Senior member
Posts: 1798
Joined: Sat Jul 16, 2005 4:15 am
Location: Los Angeles
Contact:

Post by etimh »

reflex wrote:Ralph's in Southern California apparently charges a mere $3.99 and they'll forward it to Dwayne's.
Not apparently. Its a fact. 8)

Here's another thought: Ralphs is owned by Kroger foods, which also owns a shitload of other supermarkets/convenience stores all over the country.

Instead of using Walmart, why not check your local supermarket, (wherever you are, even Florida) to see if they process through Fuji?

If this is the case, give it a try and maybe you can get the killer $3.99 deal that Ralphs gives here in SoCal. :)
Walmart processing: $4.88; Ralphs processing: $3.99. Any more excuses?
Tim
Angus
Senior member
Posts: 3888
Joined: Fri Mar 07, 2003 11:22 am
Contact:

Post by Angus »

Evan Kubota wrote: it seems like all other E6 S8 processing is significantly more than K40 was.
Sorry...was there actually anyone who thought 64T plus processing would work out as cheap (or cheaper than) K40?

64T was always going to work out significantly more expensive than K40.
The government says that by 2010 30% of us will be fat....I am merely a trendsetter :)
BonnutFilmStudio
Posts: 274
Joined: Sun Sep 12, 2004 6:04 pm
Location: Greenwich, CT
Contact:

Post by BonnutFilmStudio »

thanks for the help
User avatar
audadvnc
Senior member
Posts: 2079
Joined: Mon Jan 17, 2005 11:15 pm
Location: Minneapolis, Minnesota
Contact:

Post by audadvnc »

etimh wrote: Here's another thought: Ralphs is owned by Kroger foods, which also owns a shitload of other supermarkets/convenience stores all over the country...

Tim
Tim, here is a golden opportunity for positive activism. Are you up to a little research? Find out what US supermarkets, drug store chains, etc, handle the Dwayne's processing service and make a list for the S8 FAQ. You'd be doing an end-around on Walmart and people would love you for it.
Robert Hughes
User avatar
etimh
Senior member
Posts: 1798
Joined: Sat Jul 16, 2005 4:15 am
Location: Los Angeles
Contact:

Post by etimh »

Why not have everybody go check their local supermarket/drugstore/convenience store to see if they use the Fuji processing service? Everyone can report back and contribute to the overall effort.

People should take responsibility for their own actions--both in their choice of the businesses they patronize as well as searching out the alternatives. So take a walk and go check out the stores in your community.

From price to principle, there are plenty of reasons to take on this responsibility yourself. But I may still take your advice and get going on this project myself--its a good idea. :wink:

Tim
User avatar
reflex
Senior member
Posts: 2131
Joined: Wed Aug 18, 2004 7:25 am
Real name: James Grahame
Location: It's complicated
Contact:

Post by reflex »

etimh wrote:give it a try and maybe you can get the killer $3.99 deal that Ralphs gives here in SoCal. :)
The 'killer' deal for us Canadians seems to be $12 (Canadian) through London Drugs or Shoppers Drug Mart.

At that price, it's almost worth collecting together rolls from a bunch Canuck of filmmakers and mailing the lot down to a forum member in SoCal.
www.retrothing.com
Vintage Gadgets & Technology
User avatar
etimh
Senior member
Posts: 1798
Joined: Sat Jul 16, 2005 4:15 am
Location: Los Angeles
Contact:

Post by etimh »

reflex wrote:At that price, it's almost worth collecting together rolls from a bunch Canuck of filmmakers and mailing the lot down to a forum member in SoCal.
I'd gladly do it for anyone that's interested. :)

Tim
User avatar
reflex
Senior member
Posts: 2131
Joined: Wed Aug 18, 2004 7:25 am
Real name: James Grahame
Location: It's complicated
Contact:

Post by reflex »

etimh wrote:
reflex wrote:At that price, it's almost worth collecting together rolls from a bunch Canuck of filmmakers and mailing the lot down to a forum member in SoCal.
I'd gladly do it for anyone that's interested. :)
I might take you up on that offer!
www.retrothing.com
Vintage Gadgets & Technology
DrkAngl
Posts: 142
Joined: Mon Mar 21, 2005 11:34 pm
Contact:

Post by DrkAngl »

I would guess that if Pro8mm E-6 processing is anything like their color neg (ECN2) processing, it must be pretty bad. Combined with their pricing structure, it is definitely something that I would avoid.

There are already a number of quality alternatives available here in the states that do a good job. Local to LA is http://www.spectrafilmandvideo.com and http://www.yalefilmandvideo.com. Both handle E-6 super 8, 16 and 35mm. These places are already processing E-6 with better experience at a better price with the same turn-a-round. Then, if you have time, there is always Dwayne’s at a bargain price.
Post Reply