Filmshooting

Yes, I´m still working on all Beaulieu´s and have no plan to stop.

Björn
info@beaulieu-service.com

As nobody has answering earlier, I will try to explain.
Adjustments for backfocus on this Angenieux lens, is made by changing the thin aluminium distance ring between the part that holds the C-mount tread and lens body to a ring with right thickness.

As I told, the claw relese solenoid use sometime be "sticky" and will not work. Clean it. It use to be some oil/grease inside it which stop the movement. It must be dry.

As Richard earlier have told, the shutter will always run in an constant speed of 24f/sec. The claw are stopped from entering into film by a solenoid when runing on lower frame rate than 24 and only "release" when need. This solenoid can sometime be "dirty" and not move fast enough. A cleaning of ...

We have had contact already. The acute problem was solve with another full working camera body.

We have had contacts.
This is not a original Beaulieu part. It´s mostly common in US but rare in EU.
I don´t have this in stock, it was long time sice it was produced in US.
Bjorn

Filter size for Angenieux 1,9/8-64 for all 2008S are for 46,5mm screw on filters. The lenshood for this lens was a one pice part. If filter was used, lenshood had to be fit in front of this filter.
Angenieux 1,9/8-64 on 4008S/ZM/ZMII cameras, used a 2 part lenshood/filter holder for Serie VII ...

Tread size in front of the Angenieux 1,9/8-64 is 46,5mm.

Filter tread is 62mm. In metal lenshood a Serie 8/9 (8,5) should be used.

Chris,
I have sent you have a mail about this.

The only difference is the gold plated "B" logotype on left side of camera, otherwise it´s exactly the same camera.
This "Gold camera" was a special Ritter celebration thing. I have a few of this special gold "B" cameras in stock.

It more looks like a power problem, in combination with bad contacts inside camerabody and/or high power consumption from sticky shutter/claw mechanism and motor.

On pictures I have seen in the past, this camera used a 60m sound cartrige. This 60m soundmag had it´s bottom to the filmgate. Pressureplate was in the opening for the recordinghead.
Today, no 60m soundfilm.

This is the last version of R16 before 2016.
It has a flash socket contact and a different motorgear, that will lower the "noise" from mechanism/motor.

3008 used 7,2V 250mA/h cells as it was a "low budget" camera.
To all 5008 cameras it was used 7,2V 500mA/h cells. You can use this 5008 batteries for 3008 cameras, without any problem.